Tag Archives: Youth Outreach

HAB-4 Launch Preparations

We are again working with Hudson Memorial School on a High-Altitude Balloon (HAB) Project. Dan Pooler, AC1EN and Adam Goldstein, KC1KBZ have completed most of the classroom instruction in preparation for a HAB-4 launch and we are now looking for a suitable set of conditions to launch! We have begun final HAB launch prep which includes some modifications to the flight platform to improve its cold temperature performance.

HAB-1 In Flight
Our HAB In Flight

We’ve established a set of windows for a possible launch of HAB-4 as follows:

  • Oct 20 or Oct 21 (Sat or Sun) – this coming weekend
  • Oct 27 or Oct 28 (Sat or Sun)
  • Nov 10 or Nov 11 (Sat or Sun)

We’ve also begun the final preparations for HAB-4’s launch

HAB Launch Prep

We’ve had some problems with very cold temperatures stopping our GoPro video cameras on the HAB during HAB-2 and HAB-3’s flights.

HAB-2 Temperature Data - HAB Launch Prep
HAB-2 Temperature Data

We saw temperatures of -60° F and lower during our last two flights. The cameras will function to about -40°F so we need an insulation and heating system that can keep the cameras warmer than this for the 30 to 45 minutes when the coldest temperatures are present.

HAB Camera Insulation and Heating System - HAB Launch Prep
HAB Camera Insulation and Heating System

We’ve come up with a simple insulating and heating system for our cameras in an attempt to mitigate the cold temperature problems. Our approach is to attach a small hand warmer to the back of each camera and then insulate them to keep the heat from the warmers and the camera batteries in the camera case. We’ve also moved to sealed camera cases which should help to keep the heat inside the assembly. Our solution is lightweight and only adds about 25 grams to the weight of each camera.

With these modifications in place, we’ve carefully weighed all of the components of the HAB and determined that the launch weight for HAB-4 will be 930 grams.

Balloon Performance Parameters

With the final weight of HAB-4 established, we can use a Balloon Performance Calculator to determine the ascent time and burst altitude for HAB-4.

HAB-4 Balloon Performance Results
HAB-4 Balloon Performance Results

We need to hold the ascent time to under 110 mins to ensure that the GoPro camera batteries on the HAB have enough capacity to operate the cameras throughout the flight. With a positive lift of 1,150 grams, HAB-4 should reach an altitude of 33,420 meters (approx. 109,600 ft) and the ascent should last a little under the target 110 minutes.

Flight Path Predictions

We typically launch from the Elementary School in Winchester, NH which is in the western part of the state.

HAB-2 Launch Site in Winchester NH
HAB Launch Site in Winchester NH

Winchester is far enough west of the coastline to keep the HAB from landing the ocean when Jetstream winds are quiet to moderate.

Current HAB-4 Flight Path Prediction for Sunday, October 21st
Current HAB-4 Flight Path Prediction for Sunday, October 21st

We use on an online HAB flight path prediction tool which takes Jetstream and ground weather forecasts into account and uses our HAB’s flight parameters to predict our HAB’s flight path. The Jetstream forecasts are not very accurate until a few days before the launch so we need run daily path predictions for about a week before a possible launch date to see whether we can launch on a given date. As you can see from the above prediction, we are not yet in a position to launch this coming Sunday but the forecasts are improving.

Testing the Flight Platform

The final steps in launch preparation are to test the electronics on the HAB’s flight platform to ensure that everything is working, clear the Camera and Flight Computer SD memory cards, and charge/replace all of the batteries.

Flight Platform Final Assembly and Test
HAB Flight PlatformTest

These steps are currently underway. When these steps are complete and we have favorable Jetstream and ground weather conditions, we’ll be ready to launch

We will continue to post updates as we countdown to the HAB-4 launch. All members and friends of the Nashua Area Radio Society at invited to attend the launch and everyone can track the HAB using aprs.fi as it flies.

Fred, AB1OC

NARS Youth Expo at Boxboro

The Nashua Area Radio Society put together a very successful Amateur Radio Youth Exposition at the New England Amateur Radio Convention at Boxboro this year.

Boxboro 2018 - Youth Expo Display
Boxboro 2018 – Youth Expo Display

Our Expo featured more than ten high-quality displays and hands-on activities which introduced young people to many aspects of Amateur Radio.

Boxboro 2018 - HF GOTA Coach Jerry K1OKD
Boxboro 2018 – HF GOTA Coach Jerry K1OKD

Our HF GOTA at Boxboro 2018 was a hit with many folks making their first HF contacts with us. We operated AB1OC-AB1QB’s station remotely via the Internet. We secured a the N1T special event callsign for Boxboro and we made over 150 contacts as N1T during the convention.

Boxboro 2018 - Satellite Station Operated by Burns WB1FJ
Boxboro 2018 – Satellite Station Operated by Burns WB1FJ

We also had our transportable satellite station at Boxboro and we made quite a few satellite contacts as N1T as well.

Boxboro 2018 - Space Comms Display
Boxboro 2018 – Space Comms Display

There was lots of interest in satellites between the satellite GOTA station and our Space Communications display.

Boxboro 2018 - Kit Building (Dan AC1EN and Mackenzie KE1NZY)
Boxboro 2018 – Kit Building (Dan AC1EN and Mackenzie KE1NZY)

We added a kit building activity to our Youth Expo at Boxboro and it was a big hit!

Builders (Burns WB1FJ and his Grandson)
Builders (Burns WB1FJ and his Grandson)

Over 40 K1EL Morse Code Tutor kits got built during the weekend with many parents and grandparents building kits along with the kids.

Boxboro 2018 - Karen KC1KBW - BGHS Teacher Building a Kit
Boxboro 2018 – Karen KC1KBW – BGHS Teacher Building a Kit

Some of our High-Altitude Balloon program students and teachers also had fun with the kit building activity.

Boxboro 2018 - Forum Presentation by Dan AC1EN
Boxboro 2018 – Forum Presentation by Dan AC1EN

We did three presentations related to the activities at our Youth Expo in the forums at Boxboro. The most popular one was about the many youth outreach projects that the Nashua Area Radio Society is doing.

Boxboro 2018 - Forum Presentation by Mackenzie KE1NZY and Fred AB1OC
Boxboro 2018 – Forum Presentation by Mackenzie KE1NZY and Fred AB1OC

Dan and Mackenzie Pooler (AC1EN and KE1NZY) helped me with this one and they brought a very valuable perspective on our youth outreach work.

Boxboro 2018 provided lots of great moments and memories for the many members who help with our Expo. Check out the photo memories above to see some more of these.

Boxboro 2018 - NARS Team at Boxboro
Boxboro 2018 – NARS Team at Boxboro

A very special THANK YOU to the many Nashua Area Radio Society members who helped throughout the weekend!

We are planning another Amateur Radio Youth Exposition as part of the New England Tech Trek at NEAR-Fest in October. Don’t miss it and please come out and help us create another great Amateur Radio experience at NEAR-Fest!

Fred, AB1OC

 

Support the Nashua Area Radio Society on Amazon Smile and GoFundMe

The Nashua Area Radio Society has created many projects designed to provide STEM learning experiences and training through Amateur Radio. Some of these projects include:

To carry out our mission, we have formed close relationships with several local schools. This helps us develop and deliver effective, high-quality programs that bring learning through Amateur Radio to young people.

Dan and his completed Bo-Bot Arduino Shield - ARRL Teacher Institute
Dan Pooler, AC1EN

Dan Pooler, a professional educator at the Hudson Memory School in Hudson, NH writes:

Over the course of the past year, I have found myself the benefactor of the most amazing partnership with the Nashua Area Radio Society.  … thanks to the knowledge and generosity of the club members who have dedicated their time to helping others come to know and understand the radio sciences.  I have found what makes this dedication even more valuable is the clubs growing outreach to the schools and students of Southern New Hampshire.

You can read more about our partnership with Dan and his school here.

We provide many of these services either free of charge or at a very modest cost. We count on the generosity of our members, friends, and the Amateur Radio community to raise funds to support our work.

We have begun a fundraising campaign to enable us to continue and expand our training projects listed above which provide STEM learning experiences for young people and support for emergency communications readiness. Please consider supporting our work via your GoFundMe donation.


Copy embed code

We are also now on Amazon Smile. Please consider supporting our projects by using Amazon Smile and designating us as your favorite charity there. Click on the badge below to get started supporting our work via Amazon Smile.

It’s easy to help the Nashua Area Radio Society as you shop on Amazon. Here’s a simple set of directions to help you get going.
NARS Amazon Smile - Getting Started
Getting Started Supporting NARS on Amazon Smile

On behalf of the many young people and others that we help, thank you very much for your generosity. With your support, we will continue to work hard to provide learning opportunities for young people through Amateur Radio and to continue to make the Amateur Radio Service the best it can be to benefit everyone.

2018 Summer Tech Class - Amateur Radio Youth Outreach
2018 Summer Youth Technician License Class
Fred, AB1OC

Radio Amateurs Developing Skills Worldwide