Tag Archives: On The Air

Field Day Rebirth

Field Day 2016 found me once again participating with NARC in the bucolic setting of Hollis, NH. I thought that last year was to be my last Field Day with the club as I was in the process of pulling up stakes and heading for Florida. However, I had the opportunity to head north the weekend before Field Day to drop my grand kids and their mom off for the summer. Once I realized the proximity to Field Day on the calendar, it didn’t take much lobbying from Fred, AB1OC to convince me to hang around for Field Day.

Prior to leaving for NH, Fred mentioned that the club would be operating from the Hollis-Brookline High School ball fields at the back of the school. The last time the club operated from Hollis was in 2012 when we were still putting up 70-foot towers and dipoles. Since that time, the club has downsized as far as ambition by switching to 40-foot towers using the falling derrick method to raise a single triband antenna and dipoles without anyone climbing. For those new to the club, the falling derrick approach came about from the 2014 World Radiosport Team Championship (WRTC) event that showcased New England as the Yankee Clipper Contest Club hosted 50-plus two-person teams of the best contest operators in the world. Several club members participated in setting up some 65 towers for the mid-July event.

For 2016, plans called for setting up the two towers similar to what was done last year. This time, however, the 40 SSB station was going to be beefed up with a 3-element Inverted Vee beam array. The club had tried such an array back in the 1990’s on 80 CW. It worked OK considering the elements were suspended from a drooping rope from a tree to one of the towers, hardly in line to benefit from a director and reflector. Fred opted to set up three, 50-foot telescoping masts with pulleys to hoist the elements up. I must admit that I figured setting up the array was going to be the long pole – err, poles – in the NARC tent. With twelve sets of guy ropes per mast I envisioned a rat’s nest just begging to be tangled. My pessimism proved to be unfounded as the masts went up without much of an effort from Murphy to mess things up. Kudos to all the folks who pitched in to pull it off smoothly. The array dominated the Field Day setup like a far-off DXpedition.

Also new for Field Day was the use of the new ICOM 7300 transceivers. I learned that many in the club have purchased what is an amazing rig with a very easy user interface (especially for me) and great phase noise performance at an uncharacteristically cheap price for ICOM. The low phase noise level translates to a lower level of interference from nearby stations. I had the chance to familiarize myself with the 7300 leading up to Field Day using the N1MM+ logging program so that I could avoid the panic at T-0. I operated 40 CW with an inverted Vee that was less than 100 feet from the end of the driven element of the 40 SSB array. I did not experience any noticeable interference.

Field Day 2016 had a number of welcome surprises for me after nearly 30 years of my involvement with NARC. To put in simply: a lot of new faces. The club has been growing by leaps and bounds since I left. (Hmm, that doesn’t make me look good.) I wore my NARC call badge in case anyone wondered who I was. I was happy to meet all the new “2 X 3” hams in the club and I hope I will be able to match faces to calls as time goes on. Other highlights were making contacts on satellite after a hiatus of several years, and a cool demonstration of amateur TV with the Pepperell club.

Field Day 2016 was a homecoming for me since I also had the chance to meet old friends from many past NARC Field Days. While NARC has operated at other sites over the years, Hollis has a rich history in the club. Back in the 80’s NARC operated from what was then an open field adjacent to Beltronics off the town center. I was new to NH back then and I was amazed at the level of participation to build four towers and set up 12 or more stations. The logistics of such an operation benefited from (1) a storage barn less than a mile away on Ridge Road; and (2) a large pool of 30-40 year-old Hams to put it all together. Using the call of our host Jim, N1NH, NARC was regularly in the top 10 finishers for Field Day.

The club grew steadily back then. When the field at Beltronics succumbed to rows of storage sheds, I looked around for a suitable site that would not require a large caravan of pickup trucks to haul our equipment. The solution was right under our noses: the field beyond the orchard behind our storage barn. This proved to be the idyllic setting for a Field Day operation that everyone liked. It did not take long for the club to ratchet up Field Day participation to 20 stations or more. NARC was off and running big-time, culminating in winning it all four years in a row during the 1990’s. One of the club members secured the call N1FD for the club to showcase our accomplishments.

With Field Day 2016, I see a rebirth of the enthusiasm I enjoyed in the past. The future of NARC Field Days will be driven by the new crop of hams in the club. It will most likely NOT be “your grandfather’s Field Day”. The goal is not to see if the club can match the glory years of yesteryear but to try new things. Alas, CW is fading in popularity in the face of the digital modes that have cropped up featuring 100% copy with near-QRP power levels. Maybe more stations running PSK or some other digital mode is worth trying. Rigs like the ICOM 7300 are a step in the right direction when it comes to mitigating inter-station interference. However, more can be done to quash interference when using the triplexers so that hassle-free copy is possible with simultaneous stations using the same beam. And it doesn’t have to be just better filters. Maybe some neat lock-out or synchronization schemes can be tried to make competing modes play nicely. Field Day should always be a venue to try new ideas, whether it be interference mitigation or some odd-ball antenna design. All you newbies in the club are far better with a computer than I will ever be. Time to use all those powerful tools and tackle these age-old problems.

Ed, K2TE

Hashtags: #ARRLFD #N1FD

Huh? 2 meter QSO into Canada!

Ok, this is slightly misleading but it’s true.  I had a QSO with a Canadian station over 200 miles away on 2 meters. From my car none the less!

You may wonder how this was done. I had some help from above that’s how. I discovered that on the International Space Station (ISS) is this cool thing called a digipeater.  Now I’m no pro at this but I will attempt to explain in hopes that someone else can enjoy getting their toes wet in Amateur Satellite opportunities.

To start, here is an eQSL card of my from my first QSO of this nature:

ISS Packet Contact QSL

Note the mode on this card. It’s packet. The digipeater on the ISS relays APRS messages.  This was all foreign to me prior to this contact. I discovered all of this by accident while I was monitoring the ISS frequencies for voice and SSTV. APRS transmissions were pouring out of my radio. Curiosity got me to research the sounds and ultimately steered me towards giving it a go.

Although I already had all the parts and pieces to start my way I lacked the knowledge of what to do. It took some figuring out, but I now have a simple and relatively low-cost way of working some satellites. Unlike voice mode, you do not need a directional antenna to do packet through the ISS. I use my mobile radio in my car, an omnidirectional antenna, a USB SignaLink sound card and an inexpensive Windows tablet pc. I downloaded UISS and AGW packet engine (both are free).  I think I blew a brain fuse or two figuring out how it all goes together, but in the end, it works.

The uplink and downlink frequency for this is the same: 145.825

Go ahead, tune in and listen while the ISS is over your location.  There are many websites and smart phone apps to give you the pass schedule.

If you are interested in this and want help getting started on this for yourself then feel free to shoot me an e-mail [email protected]

Hope to hear you on the air!

Curtis (KB1RTQ)

6M Propagation to Europe on JT65.

Wow, six meters was wide open this morning to Europe. I started playing on CW, but the signals were so steady that I decided to go to JT65 so I could see where I was being heard. I have included a pskreporter.info map filtered for my station for the previous 6 hours. The snapshot was taken at 2016-06-13 at 18:05 UTC. Beam was between 45 and 60 degrees. The USA stations were all off the back of a 3 element Yagi. Running 70 watts. The rig was my Flex-5000.

The ARRL VHF contest this weekend also had great openings, primarily state side, although I did work an EA8.

This is the time of year to get on 6 meters.

73,
Bill
NJ1H

Radio Amateurs Developing Skills Worldwide