Tag Archives: VHF/UHF

Air Force Research Lab Tracks Sporadic-E

Amateur radio enthusiasts have been taking advantage of Sporadic-E skip or simply sporadic-e for many years. Sporadic-E is a poorly understood propagation method that takes advantage of ”clouds” of highly charged particles in the lower atmosphere. Using this method you can ”skip” a signal off the cloud and communicate over much longer distances than you normally could at VHF frequencies.

Late spring into summer is the time of year when sporadic-E really takes off in the northern hemisphere, but Sporadic-E can show up at any time and at any place making predictions very difficult. Really the best way to see if there is any chance of skip is to check the spotting networks or just get on the radio and give a holler and see who answers you just make sure to have your maidenhead grid square locator. Here’s a good link to one – https://www.levinecentral.com/ham/grid_square.php.

Well, apparently amateurs aren’t the only ones interested in predicting Sporadic-E.

I was listening to one of my podcasts (This Week in Amateur Radio for the record) at work today and thought I would pass on some interesting information. Apparently, The Air force Research Lab is also interested in tracking Sporadic-E clouds and in a way that we may not have expected. I won’t ruin the surprise here but this discovery sounds very interesting and has far-reaching effects.

Sporadic-e
One antenna of the Sporadic-E detection array

You can read the whole article here.http://www.arrl.org/news/air-force-research-laboratory-tracks-sporadic-e.

73

-Jim K1BRM

 

EME Station 2.0 Part 10 – Antennas On The Tower

After a year’s worth of planning and 10 months of construction, we have our new 2m EME Antenna System installed on our EME Tower and working! This stage of our project took about a week…

Source: EME Station 2.0 Part 10 – Antennas On The Tower

We’re making good progress on a new 2m EME Antenna System here at AB1OC-AB1QB. Our Antenanns system is up on our EME Tower and we are working through the setup and integration of the equipment and software for our EME Station.

EME Antenna Installation Using A 50 Ft Boom Lift
EME Antenna Installation Using A 50 Ft Boom Lift

We rented a boom lift and worked with Matt and Andrew from XX Towers to get our Antenna System up. Our antenna installation took a week to complete and it turned out quite well.

You can read all about this step in our project via the link above. We should have the work needed to bring the rest of our EME Station together sometime during the next few weeks. We can already receive signals that other Hams are reflecting off the moon!

Fred, AB1OC

ISS Voice Repeater is QRV!

Thanks to some great work by the ARISS Team, a new Voice Repeater system is operating on the International Space Station (ISS)! Here is the access information…

Source: ISS Voice Repeater is QRV!

Thanks to some great work by the ARISS Team, a new FM Voice Repeater system is operating on the International Space Station!

ISS Voice Repeater Hardware
ISS Voice Repeater Hardware

The link above provides the details and the information needed to access the ISS Voice Repeater.

I was able to work several stations using the new Voice Repeater this morning. It is very sensitive and uses 5 watts of downlink power with a good antenna on the ISS. I was able to make solid contacts using the Ground Station here using only 1.5 watts uplink power when the ISS was at 10 degrees above the horizon. At least one of my contacts was with a station using an HT with a whip antenna!

The voice repeater is sensitive enough and uses a power level that will enable folks with an HT and a whip antenna to make contacts using the ISS when its close to the horizon. It should also be easy to make contacts using mobile rigs that can support cross-band operation as well. Program your radios!

I’m looking forward to working you through the ISS!

Fred, AB1OC

Radio Amateurs Developing Skills Worldwide