- This topic is empty.
Viewing 1 post (of 1 total)
-
Posts
-
Assemble DL2MAN’s 2m Moxon, detailed in https://youtu.be/9c3AjUn_Vvo?feature=shared All parts 3D-printed, tubes and wires cut & soldered. You’ll need a mast (a short PVC tube for a handheld or a longer one you can afix to a post to hold it up), a RG316 or RG58 coax BNC Male cable of appropriate length and an adapter to connect to your radio (BNC female to SMA Male/Female, as your radio requires). Assembly requires tying four knots!
Bring your HT. We’ll have some coax and adapters on hand so you can test your antenna on our antenna analyzer.
Viewing 1 post (of 1 total)
- You must be logged in to reply to this topic.