Category Archives: Newsletter

Nashua Area Radio Society Newsletter Articles. You can find an archive of our Newsletters on our website.

Activities, Education and Training, Featured, General, Newsletter, On The Air

Why Would I Want To Be In A Contest?

October 30, 2016 Fred Kemmerer

As I sit here watching the N1FD teamwork the CQ Worldwide DX contest, it got me thinking about what contesting is really about and why we contest.

Let me try to answer the second question first. There are lots of different reasons to operate in contests. Many folks do this to work new countries, states, zones, islands, grids, etc. It seems that you can find a contest that is designed to create opportunities to work just about anything that you can think of on the bands. Others work contests to try to test out their stations and to improve their skills as operators. Of course, many folks compete to win the contest or to place better than they did the last time. Some may even compete to set a record.

Joe KB1RLC in the CQ Worldwide DX Ham Radio Contest — Joe KB1RLC in CQ Worldwide DX at AB1OC

Perhaps the best reason to contest is that it provides one of the best opportunities to be a better operator. You may say, aren’t contesters just QRM on the bands on weekends when we want to use them for other stuff? I can see why some feel this way. I wish that more amateurs who feel this way would take some time to listen more closely to what is going on during the contest.

There is nothing quite like listening to a skilled operator work a pileup from a rare place during a worldwide contest like CQ Worldwide DX. Such an operator will make 100’s of calls in a row. They will accurately get each caller’s information into their logs and the really great ones will also use their skills and energy to ensure that each of their callers gets the contest station’s information correct in their logs as well.

This requires great skill in many areas. First, you need to really learn to listen and to pick out weak and fading callers in the presence of a great deal of QRM. It’s often necessary to piece together a good callsign using several rounds of a QSO. Good contest operators know perhaps 500 or more of the most common calls used in their contest and this information helps them to recognize calls and avoid making errors. The great ones also know how to work with each caller to ensure that they get the correct information to complete the contact and that the other operator does the same.

Jamey, KC1ENX Operating in the CW Worldwide DX SSB Ham Radio Contest — Jamey, KC1ENX Operating in CW Worldwide DX SSB

I like to think of this as getting in the head of the other person during the QSO. Did they get my call right or do I need to slow down and say my call again? Did I hear their callsign and exchange correctly or do I need to give them a chance to ask me to correct something for them? While I am doing all of this, I need to be as fast and efficient as possible. These skills take a great deal of practice to develop. You can get there with less time in the chair during contests if you take some time to listen and pay close attention to the great operators that you will hear during contests. First and foremost, great contesters are great listeners and they can accurately pick out call signs on the first try without making mistakes.

N1MM+ Logger Setup For Our Contest Operation — N1MM+ Logger Setup For CQ WW DX

What, you say that any operator will do great when they are sitting at a big contest station with a lot of power and big antennas? It is true that having a well-built station and good hardware and computers helps make contacts easier. Computers and modern software like N1MM+ also play an important role in making the mechanics of finding and making contacts accurately more efficient. The contest community makes their software available free of charge to everyone. I strongly encourage anyone who contests to set up and learn to use modern contest software. While these tools help, they are just like construction tools in the hands of a carpenter. The master carpenter can create a work of art with a hand saw, a hammer and some basic hand tools while an apprentice can struggle to get good results from the best shop and tools available.

Also, most contests are designed with categories to group contesters with their peers who have setups similar to theirs. Station hardware differences also do not account for the contester who goes to an island in the Caribbean with a 100W radio and a simple antenna and wins an award in a contest.

Julio, HI3A Competing in the WRTC Ham Radio Contest — Julio, HI3A Competing in WRTC

We also saw this clearly during the WRTC competition here in New England a few years ago. We had the best operators in the world competing using the exact same towers and similar antennas that we use for our annual Field Day operation and they made 2,000 or more contacts in a 24 hour period using 100W radios. Many of these operators did this while making almost no mistakes!

So what else makes a great contest operator besides working fast and efficiently to complete and log lots of contacts accurately? For one, these folks know a great deal about propagation and how to take the best advantage of the conditions at hand. They know when it’s time to run on 20m into Europe, when to look for Japan on 15m for those multiples, what time of day and segment in the contest to focus on contacts in the Caribbean and South America, etc. They learn when they need to change bands and when it’s time to work multipliers or tune the band that they are on with their second radio or VFO. They can quickly determine the band and propagation conditions on the contest weekend and adjust their strategy to take the best advantage of the conditions at hand.

A great operator also learns to make the best use of their station and antennas. They understand where their stations work well and they adapt their approach to a contest based upon this. They also spend lots of time looking at and comparing their performance from contest to contest and against other competitors in the same contests to see where they can improve.

So what if you don’t really want to win contests? Why would you bother with this? The most important reason is that contesting will make you a better operator. You’ll learn to hear that really weak DX and get them into your log accurately. When you get on the air, you’ll be an operator that others want to work because they know you will help them complete a contact that they want. You will find and work stations that most others will miss. In short, a bit of dedication to contesting will make you a great operator.

Bands and Modes Worked By N1FD (Noon On Sunday)

As the CQ Worldwide DX Contest weekend draws to a close, I’d also like to add that I am proud of the job that the operators in our club did at our station. Most of them had almost no DX contest experience before this weekend. They worked the contest hard and have made contacts to over 100 counties in about 40 hours of operating. They have all improved their skills greatly and I look forward to working all of them at any time.

73, and see you in the contest!

Fred, AB1OC

Antennas, General, Homebrewing, Newsletter

Hang ‘Em High

October 14, 2016 Nashua Area Radio Society

Dick Powell, WK1J

A Little about me

At 75 yrs old, I have a modest station, consisting of a Mosely TA33 Tri-bander (circa 1986) on a homebrew mount, at the peak on my single-level home (45ft.) and a homebrew 160-80-40M inverted Vee at 65ft. I wound all the loading coils for the 80M and 160M traps and it performs very well and takes only 10 ft. more space than a typical 80M inverted Vee dipole (excellent for 160M on a city sized lot). I plan to write an article on its construction in the future.

I have worked 90 countries on 160M, 96 on 80M and 303 on 40M with only 100 Watts output with this antenna. I am fortunate to be at 840 ft. above Sea Level with a clear shot to Europe, South America, and the Caribbean. Japan is workable but I struggle to get through west coast stations to Asia and the Pacific. Four more confirmed countries on 80M and I will have worked 5Band-DXCC with 100W, proof that at my age, you don’t need a tower, kilowatt and the latest, greatest radio, although they make the challenge easier.

This summer I started in earnest to revamp my “small pistol” station, knowing that the sun spots are declining and that I needed to improve my low band 160m, 80m and 40M transmitting antennas. As well as my ability to hear weak signals better with the increased noise on the bands.

Latest Project: Beverages and 9-Circle Receiving Array (an article coming in the future)

This summer, I worked on improving my ability to receive weak signals by building switchable, (bi-directional) beverage antennas for NE/SW, NW/SE and E/W, switchable from my operating position. You know what they say. “If you can’t hear them, you can’t work them!”

Currently, I am in the final stages of building and deploying a 9 circle receiving array developed by the Yankee Clipper Contest Club of which I am a member. Note: The components are now offered as a kit in partnership with DXEngineering, with DXE supplying all the interconnecting cables and phasing lines. My preliminary tests show a significant improvement (8db better signal RX strength and lower noise floor by 2S units) over the beverages and it is steerable every 45 degrees. The ability to null out interference is unbelievable even when compared to the beverages. Now I need to work them! I am currently building a 160M/80M “double L”(no ground radials needed), separate 40M and 80M Delta Loops, replacing my older dipoles. I hope to have these in place by CQWW SSB later this month.

Now this Article: – Antenna Launcher

How to get these new wire antennas hung from the many tall pine trees on the property? In the past, I have used a sling shot to get dipoles up but usually only 50-60 ft. consistently.

I read with interest the recent article that Brian, AB1ZO wrote: “I can’t believe my antenna’s up!” Seeing the pictures of the method he used to toss a line over the tree got me to thinking about a better approach. I wanted something reliable, easy to use, easy to make (not buy), and portable in the woods, no electricity/batteries, no butane and spark ignitors (I would probably cause a large forest fire, hi!). In other words “a field day” type solution. I also recalled Dennis, K1LGQ’s presentation on the “potato launcher” he demonstrated at project night.

I viewed many YouTube videos and found a lot of excellent approaches. I settled on a pneumatic (compressed air) approach. I designed the antenna launcher to be very compact, most were quite long and not ideal for trudging through dense woods. By no means is this approach unique, but it is proving to be very reliable, cheap (less than $60 in materials, if purchased) and can easily reach heights of over 150ft. I use a simple bicycle tire pump (found for $25 on eBay) to fill the compression chamber. A compressed C02 air refill canister for a Paintball gun or a battery operated car tire pump would also work.

This is a picture of the completed Antenna Launcher. It took 2, 4 hour days to complete as I waited 24 hours to ensure the PVC cement cured in the pressure chamber (important safety step). I chose to spray paint it and added labeling.

I build the launcher in 4 main sections:

Pressure Chamber
A Modified Inline Irrigation Valve
U section (for a compact design)
Launching Tube

Step 1 – Pressure Chamber

I looked at both 3in. and 2in PCV schedule 40 Pipe. The box stores do not carry 3in PVC rated for pressure applications. Some videos on YouTube do use it; I chose the 2in for safety reasons (max. 280psi).

Below is a picture of the pieces needed to assemble the pressure chamber, including the tire (Schrader) valve and pressure gauge (optional). I opted to have the pressure gauge on the chamber when filling it, rather than having to read one located on a tire pump, I blame the bifocals, it couldn’t be old age!

The next 5 pictures show the progression of the assembly. For brevity, (in this article) the pictures will give you a reasonable idea of the construction. I plan to create an accompanying (downloadable) PDF document detailing all the steps with instructions.

Step 2 – In-line sprinkler Valve Modifications

This picture shows the parts needed to modify a common irrigation valve for air pressure vs electrical use. A good YouTube video of modifying the Rain Bird HD 1 in. valve can be found at https://youtu.be/A3EOdNP6Iag

The next 7 pictures show the detailed progression of the modification. They may be a little easier to see than in the video.

Step 3 – The “U” Assembly (or let’s turn the corner!)

I wanted the launcher to be as compact as possible for better portability and chose to assemble some pipe to make a “U” turn, prior to installing the actual launch tube.

The following 2 picture shows the detail of the assembly of the U-turn.

Step 4 – The launcher’s “business end” where all the work gets done…

Conclusion:

I hope I haven’t put you to sleep by now. This was a fun project and it works really well and will last for many trips into the woods in the future. There are very few mechanical parts which could fail (only the inline valve and blow gun) and the selection of higher PSI PVC ensures a good degree of safety, even if over inflated a little. The inline valve is the “weak link” so to speak, rated at 100psi max.

Now to go and “Hang ‘Em High”

73 Dick, WK1J

Questions: [email protected] [email protected]

Radio Amateurs Developing Skills Worldwide