Forum Replies Created
-
AuthorPosts
-
July 14, 2020 at 2:23 pm in reply to: Tech Night Tonight – Getting Started with VHF+ Weak Signal #86593
Hi Mike,
Our Tech Night will probably go until about 8:30 pm this evening and its OK to join late.
Hi Jamey,
Thanks for putting the Fox out! Can you give us a rough idea of where it is? Nashua maybe?
I’ve put together a short introduction and checklist for our posting how-to session this evening. Here it is –
You might want to print out a copy and have it by your computer during our Zoom session this evening.
Best and 73,
We have found a good home for this antenna. Thanks, everyone for your interest.
Nice job with the net Craig, thank you!
Hi Scott,
It sounds like you were pretty lucky that this did not get inside. It’s really tough to build a ground system that can stand a near-direct hit like this. The best thing to do is to disconnect your coax and lay it back away from the house when you are not using your antenna. I’m guessing that you might have done this but we don’t expect to have a lightning storm as we had on Sunday in March!
I’d suggest you open the cover of your radio and see how much obvious damage there is inside. If there is not visible or only minor visible damage, it might we worth trying to get it repaired. You might also be able to get your homeowner’s insurance to cover the damage as well.
Sorry to hear about your bad luck.
Hi Scott,
Welcome to the Nashua Area Radio Society! Thanks for taking the time to tell us about yourself. It is great to have you in our club.
We really appreciate you taking the time to introduce yourself. You might want to add a picture to your excellent introduction and publish it as a member spotlight on our Blog. Here’s some examples for you to look at –
https://www.n1fd.org/tag/member-spotlight/
Welcome aboard!
Our meeting program will be a presentation on QSL’ing by Eric Williams KV1J, the W1 QSL Bureau Manager.
February 18, 2020 at 9:51 am in reply to: “Tiger Tail” or “Rat Tail” Counterpoise for UHF/VHF HT Antennas #81110Hi Aron,
If you have a terminal that is close, a little work with a drill can get you there. Let me know if you can’t find terminals that will fit. I probably have some more that will work here.
Anita and I would be interested in going and we could bring 3 additional folks.
-
AuthorPosts