WEEKLY REPEATER NET CHECKINS – SUNDAY MARCH 20TH

[Nashua Area Radio Society]

Here are the check-ins for our weekly repeater net on Sunday March 20th.

 

• Hardy, KC1PEQ, Nashua

• John, W1SMN, Nashua

• Tony, AB1XK, Andover

• Stephen, N1SSR, Dunstable

• Alan, KC1PWB, Nashua

• Frank, KC1QFU, Londonderry

• Dan, W1MUZ, Bedford

• Jim, KN4UJW, Eulee, FL

• Joe, AC1LN, Londonderry

• Jack, WM0G, Nashua

• Len, KC1HLU, Hudson

• Jonathan, KC1QCY, Nashua

• Miguel, KC1LKO, Hollis

• Marc, WB1EDF, Bedford

• Mike, KC1QMN, Wilton

• Jon, AC1EV, Tewksbury – Net Control

Thanks to everyone who joined in.

Jon AC1EV

 

[Nashua Area Radio Society]

I’m not quite sure where to post this question, but thought I would start here. Is anyone using the 6 meter repeater in Brookline to join this weekly repeater net?

It’s connected to the N1IMO repeater network. I can hear it loud and clear, but have been unable reach anyone, including this weekly net.

I find some confusion on the internet about its offset. Some directories say 500KHz, others say 1MHz. I have tried both with no success.

At present I have my settings: 53.930MHz, -500KHz offset, and 88.5 PL.

Maybe I just don’t have a good enough path, but as well as Rx comes through, it seems I should be able to reach it.

Marv KC1LML Peterborough

 

[Nashua Area Radio Society]

Hi Marvin,

I don’t think I’ve heard anyone on the net via 6 meters.  Here is the info from the N1IMO website.

Brookline, NH: 53.410 Minus offset, PL 88.5 146.130 Remote Receiver for 146.73 Minus offset PL 151.4

Brookline, NH:
Home to the 53.410 repeater. Also serves as the third receive site for the 146.730 repeater. To access the system using this site, one would set their radio on the 146.730 using a negative offset and a TX PL tone of 151.4. This site is located just off Rt. 13 at the old Big Bear Ski Area at an elevation of 600′ on top of a 180′ cell tower.

You can see this page at:  https://n1imo-n1imn.us/n1imo-n1imn-1/

I hope this helps

Jon -AC1EV

 

[Nashua Area Radio Society]

Hi Jon,

Thanks for getting back. I was just curious about that 6m repeater after I happened to hear it sending out a callsign one day. I can get on N1IMO through some of the 2m and 70cm repeaters , so all is good.

Marv KC1LML

 

[Author]

Posts